Description
4″ X 15′
ML450 SEAL SKIN PIPE WRAP is a resin-coated, fiberglass cloth designed for rapid repair of ruptured piping and other patch jobs. Seal Skin Pipe Wrap is water activated, making it excellent for water or steam line repairs. Sets up in approximately 30 minutes. Seal Skin Pipe Wrap works on PVC, metal, rubber, fiberglass, plastic and other type materials. It has high adhesive qualities, is odorless, and is non-combustible. Once cured, Seal-skin can be sanded or painted.
TECHNICAL DATA:
Compressive Strength……………………………………………….26,600 psi
Tensile Strength……………………………………………………….24,900 psi
Flexural Strength………………………………………………………16,100 psi
Bond Strength………………………………………………………………..98 psi
Barcol Hardness………………………………………………………………….53
Heat Resistance……………………………………………………………1,100ºF
Dielectric Strength…………………………………………………..16,060 Volts
Cure Time @ 75ºF…………………………………………………….30 minutes
Spray Penetration Test:……………………….4 layers to total obliteration
Temperature cycle test:……………….4 layers recycled from 50ºF – 90ºF with no delamination or bond loss
APPLICATION INSTRUCTIONS:
1. Grind, brush, sand, or grit-blast surface repair area. Thoroughly clean and degrease with Metal Prep II Degreaser.
2. Remove Seal-Skin Pipe Wrap from the protective pouch.
3. Apply Seal-Skin Pipe Wrap by firmly wrapping the damaged area, extending 2 inches beyond repair.
4. Continue to apply pressure, molding Seal-Skin Pipe Wrap around the pipe by wetting and rubbing gloved hands over the surface in direction of the wrap until it begins to set.
5. If rupture in pipe is larger than 1/2”, a plug will be required before wrapping the pipe. This can be done with Steelstick™, or if Steelstick is not readily available, by cutting off several inches of the pipe wrap and forming a plug, forcing it into the rupture. Use remaining Seal-Skin Pipe Wrap to wrap plugged area until sufficient buildup is present.
Note: In normal conditions, Seal-Skin is activated by atmospheric humidity. In dry conditions, Seal-skin can be immersed in ANY water based liquid to promote curing.
TYPICAL APPLICATIONS:
• Repair Elbow Holes
• Repair Pipe Leaks
• Tank & Vessel Patching
WARNING: This product is a potential skin sensitizer. May cause injury to eyes and skin following prolonged or repeated contact. Inhalation of vapor may cause respiratory tract irritation. Use adequate ventilation when applying to avoid inhalation of vapor. Prevent contact with eyes and skin. Read and understand M.S.D.S. sheet.
