ML800

Slip-Not

CODE: ML800

$1,235.00

In stock

5 Gal

ML800 SLIP-NOT is a 100% solids, solvent free, self-leveling epoxy floor surfacing compound which, when topped with an aggregate, provides a chemical resistant, durable, non-slip surface. It has excellent adhesion to concrete, steel, and wood. The solvent free formulation avoids any present or future restriction on VOC content and minimizes worker hazards during application. Slip-Not comes with our super duty ML811 Gripper Granules, which are ideal for heavy wear areas (forklift lanes, loading ramps, etc.) For light wear areas (pedestrian traffic), ML810 Silica Sand can be used as the aggregate.

TECHNICAL DATA

Working and curing times:

Application Temperature Range:.……………………….45° to 100°F

Mixing Ratio:…………………………………………………. 4:1 by volume

Pot Life @ 70°F:………………………………………………………….20 min

Recoat Time @ 75°F:……………………………………………4-24 hours

Cure Time:…………………………………………Light Traffic: 4-5 hours; Heavy Traffic: 24-36 hours

Coverage: ……………………………………………..145 sq. ft per gallon @ 10 mils thick.  Allow for 25% loss

Color:………………………………..…………………………………………...Gray

DIRECTION FOR USE:

(Note:  Allow new concrete to cure at least 28 days before applying Slip-Not to the surface.)

1) Follow concrete Surface Preparation Guide to assure all loose and unsound concrete, contaminants, and other foreign deposits are removed.

2) If the surface is rough or porous, apply an initial primer coat to the surface using Metalink ML819 Concrete Primer/Sealer. Allow to cure according to directions. Slip-Not will need to be applied while Concrete Primer is still tacky.

3) For best results, apply by brush, roller (using a medium nap, phenolic core roller cover), or with a V-notched squeegee. Apply an even layer, approximately 10 to 30 mils thick.

4) While still wet, broadcast a thin coating of desired aggregate evenly over surface. Allow to dry based on cure times.

5) Vacuum excess aggregate from surface.

6) If a protective coating is desired over the aggregate compound, a thin layer of ML801 Top Coat can be applied after vacuuming excess from surface. This should be done within the recoating period as shown in the technical data.

7) Allow full cure as shown in technical data before using.

WARNING:  This product is a potential skin sensitizer. may cause injury to eyes and skin following prolonged or repeated contact. Inhalation of vapor may cause respiratory tract irritation. Use adequate ventilation when applying to avoid inhalation of vapor. Prevent contact with eyes and skin. Product is combustible. Keep away from all sources of ignition during storage, mixing, application, and cure. Read and understand M.S.D.S. sheet. We can accept no responsibility or liability for lack of results because the storage, handling, and application of the compound is beyond our control.

1/16 P701 BOND COAT 95/5 NI/AL 33 LB SPOOL

CODE: P701-1/16

$49.50
In stock

Minimum quantity for "1/16 P701 BOND COAT 95/5 NI/AL 33 LB SPOOL" is 33.


1/16 P702 STAINLESS 25# SPOOL

CODE: P702

$13.67
In stock


1/16 P704 ALUMINUM BRONZE 30# SPOOL

CODE: P704-1/16

$24.92
In stock


1/16 P710A-25 CHROME CARBIDE 25#SPOOL

CODE: P710A-25

$26.52
In stock


1/16 P711A-25 TUNGSTEN 25# SPOOL

CODE: P711A-25

$58.05
In stock


1/16 P718 PURE COPPER 25# SPOOL

CODE: P718

$23.19
In stock


1/16 P725A-25 TITANIUM 25#SPOOL

CODE: P725A-25

$173.62
In stock


1/16 P756A ONESTEP STEEL 25# SPOOL

CODE: P751A

$19.35
In stock


1/16 P760-25 ULTRAGRIP 25#SPOOL

CODE: P760-25

[Contact us for a price]
In stock


1/16 P761-33 ULTRAROLL GRIP 33#SPOOL

CODE: P761-33

[Contact us for a price]
In stock


1/16 P790A-25 MORPHALLOY 90 25#SPOOL

CODE: p790A-25

$41.29
In stock


1/16 P795A-25 MORPHALLOY 50 25#SPOOL

CODE: p750A-25

$36.95
In stock


1/8 ALUMINUM 1100 P781C-50 2x25# COIL

CODE: P781C-50

$5.10
In stock


1/8 ALUMINUM 1100, P781C-30 30#SPOOL

CODE: P781C-30

$5.29
In stock


1/8 ALUMINUM 1350, P780C-30 30#SPOOL

CODE: P780C-30

$4.23
In stock


1/8 P703C HARD STAINLESS 50# COIL

CODE: P703

$13.90
In stock


1/8 P704 ALUMINUM BRONZE 25# SPOOL

CODE: P704-1/8

$24.92
In stock


1/8 P720C ULTRA MOLY 30#COIL

CODE: P720C

$71.59
In stock


3/16 ALUMINUM 1100 P781E-30 30#SPOOL

CODE: P781E-30

$4.23
In stock


3/16 ALUMINUM 1100 P781E-50 2x25#COIL

CODE: P781E-50

$5.19
In stock


3/16 ALUMINUM 1350 P780E-30 30#SPOOL

CODE: P780E-30

$4.60
In stock


Anti-Seize Dispenser Pump Brush

CODE: EQ001

$29.60
In stock


Anti-Seize Lubricant

CODE: CH122

$19.89
In stock


BLU-GOO SUPER SEALANT/LUBRICANT

CODE: ML013

$435.00
In stock


Brushable Ceramic

CODE: ML406

$2,150.00
In stock


Brushable Ceramic X.H.D.

CODE: ML408-QT

$174.00
In stock


Ceramic Bead Polymer

CODE: ML355

$89.00
In stock


Concrete Patch

CODE: ML820

$290.00
In stock


Concrete Primer and Sealer

CODE: ML819

$449.00
In stock


Diablo Twin Wire Arc Thermal Spray System

CODE: P9000

$25,000.00
In stock


Epoxy Sticks

CODE: ML001 - ML004

$17.99
In stock

Please, select one


Machinable Repair Compound

CODE: ML400

$950.00
In stock


Metalink 11M Combustion Wire Thermal Spray Gun

CODE: P700011M

$4,100.00
In stock


Metalink 12M Combustion Wire Thermal Spray Gun

CODE: P700012M

$4,585.00
In stock


Metalink 14M Combustion Wire Thermal Spray Gun

CODE: P700014M

$4,880.00
In stock


Metalink 5000 Torch Gun

CODE: P5000

$1,799.00
In stock


Metalink Complete Thermal Spray Outfit

CODE: P7000TSAKT

[Contact us for a price]
In stock


Metalink Fusion Torch

CODE: P600

$1,499.00
In stock


Metalink Sonicoat

CODE: P8000

[Contact us for a price]
In stock


MetalPrep II - Hight Purity Safety Solvent
$9.50
In stock


MultiJet Spray Gun

CODE: P8001

$6,289.00
In stock


RTV Silicones

CODE: ML652

$12.99
In stock


Seal Skin Pipe Wrap

CODE: ML450

$154.00
In stock


Slip-Not

CODE: ML800

$1,235.00
In stock


The Pipe Tourniquet

CODE: EQ003

$24.00
In stock


Top Coat

CODE: ML801

$274.00
In stock


Top Coat XHD

CODE: ML805

$298.00
In stock


Trowelable Ceramic Polymer

CODE: ML410

$275.00
In stock


Uni-Spray-Jet Gun Kit

CODE: P5001KT

$6,160.00
In stock

Type the characters you see in the picture above.

Loading...