Description
ML013 BLU-GOO™ is a special blend of inert materials that offer a variety of industrial uses where reduction of metal to metal contact is desired. As a thread sealing compound, Blu-Goo™ forms an interface between male and female threads that provides anti-galling/seizing protection of the joint, which can withstand pressures up to 20,000 psi, even in worn, corroded or badly machined thread surfaces. Blu-Goo™ is also an excellent gear box additive*. It forms a film over the internal parts, resulting in a noticeable reduction in play, gear noise, and leakage. It also reduces torque stress, allowing a reduction in drive power requirements. When applied to gasketed surfaces or used as a packing supplement, it prevents fluid leakage from around the seal. Good for any application up to 600ºF, Blu-Goo™ will work on Stainless Steel, Aluminum, Iron, Brass, Fiberglass, Plastic, and is not affected by acids, caustics or common solvents.
- Helps Seal new or worn threads.
- Withstands high pressure and high torque.
- USDA Approved for use in Federally inspected meat and poultry plants, USDA Rating: H-2.
- Can be safely used on stainless or other alloys.
- Use on steel, fiberglass, aluminum, brass, iron, copper, PVC, CPVC, and ABS pipe threads.
FOR USE ON:
Pipe Fitters Sealant should be used on all pipe threads where protection of threads and/or sealing is required. Use on pipe threads, pipe fittings, fire sprinkler systems, steam lines, valve stem packing, pump packing, etc. Pipe Fitters Sealant provides immediate sealing and allows for tighter make-up at lower torque, as well as easier breakout without galling, stripping or otherwise damaging the threads. It is generally unaffected by most fuels, oils, gases, caustics, acids and many other common solvents.
APPLICATION INSTRUCTIONS:
Thread Sealing: Apply Blu-Goo to both male and female threads. Spread evenly with brush or other applicator. As connection is being made-up, Blu-Goo will “plate out” evenly over threads. As Gearbox Additive*: Mix Blu-Goo to gear oil in the following amounts: 1 quart, 1 ounce of Blu-Goo; 2 quarts, 2 ounces; 4 quarts, 3 ounces; 8 quarts, 5 ounces; 12 quarts, 6 ounces; 16 quarts, 7 ounces. As a Gasket Dressing: Coat one side of metal flange face. Press gasket into Blu-Goo on surface. Then coat exposed face of gasket. To help prevent leakage, also coat the inside edge of the gasket before making up flange. As Packing Supplement: Coat each ring of packing. Put in place, seating each ring individually. Replace follower gland and hand tighten lightly. For other applications, apply similarly as products previously used.
SPECIFICATIONS:
Product Type……………Pipe Thread Compound
Product Color………………………………Off White
Temp Range (Solids)………………-30ºF to + 500ºF
Temp Range (Base Oil)……………. 5ºF to +500ºF
Service Rating (PSI)………………………….10,000
Penetration (ASTM-D-217)………………..NLGI 2
Dropping Point (ASTM D-2265)……………..None
NOTE: Not recommended for gear boxes with small ball or roller bearings, oil circulation systems, or filter systems.
TYPICAL APPLICATIONS:
Thread Sealant
Gearbox Additive
Gasket Dressing
Packing Supplement
Pump Lubricant
Low Temperature Anti-seize
O-ring Lubricant
