Description
1 GALLON KIT
ML801 TOP COAT is a 100% solids epoxy compound made to provide a tough, corrosion resistant sheathing for metal or concrete surfaces. Top Coat is approved by the USDA for use in food processing plants. It provides excellent abrasion and impact resistance as well as good chemical resistance. This product contains no volatiles and applies very easily. Great for sealing in aggregate for non-skid coatings such as METALINK SLIP-NOT.
TECHNICAL DATA:
Working and curing times:
Application Temperature Range:…………………………….45º to 100ºF
Mixing ratio: ……………………………………………………..4:1 by volume
Pot Life @ 70ºF:………………………………………………..15-30 minutes
Recoat Time:………………………………………………4-24 hours @ 75ºF
Cure Time:……………………………….Ready for light traffic: 4-5 hours,
Heavy traffic: 18-24 hours
Coverage:………………1 gallon will cover 145 square feet @ 10 mils.
Color: ………………………………………..Grey (Others by special order)
Compression Strength………………………………………………11000 psi
Tensile Strength………………………………………………………..9000 psi
Flexural Strength……………………………………………………….3200 psi
Bond Strength:…………….Stronger than concrete per ACI test 59-43
Chemical Resistance:
Sulfuric Acid- 30%, Nitric Acid-10%, Citric Acid-5%,
Ammonium Hydroxide-20%, Sodium Hydroxide-20%, Jet
Fuel, Fresh and Salt Water, Hydrochloric Acid-10%, Acetic
Acid-10%, Phosphoric Acid-10%, Potassium Acid-10%,
Potassium Hydroxide-20%, Gasoline, Xylene, Mineral and
Vegetable Oil.
See Corrosion Guide for Further Details
DIRECTIONS FOR USE:
1. Follow Concrete Surface Preparation Guide or Metals Preparation Guide as applicable for substrate
preparation.
2. For concrete applications, apply an initial primer coat to the surface using METALINK ML819 Concrete
Primer/Sealer. Allow to cure according to directions. (Top Coat will need to be applied while Concrete
Primer/Sealer is still tacky.)
3. Add 4 parts Base (Part A) to 1 part hardener (Part B) by volume (or all of both containers if entire batch
is being used). Mix well using a power mixer for approximately 2 minutes.
4. Pour mixture out of container and on to the primed substrate. Spread evenly, using a hand roller.
Top Coat Tech Sheet (TECH-ML801_TopCoattsGCP001.pdf, 664 Kb) [Download]
Top Coat MSDS (MSDSP-ML801_TOP_COAT_-_Part_A_&_B_-_031313001.pdf, 181 Kb) [Download]
